Product Description
Introduction:
Disc feeder is composed of the motor, reducer, disc, adjusting sleeve, seat and other components. Motor though the triangular belt, reducer drives disk rotation. The lower part of the disc is connected to the reducer. The motor and reducer are fixed to the frame.
Application
Disk feeder is applicable to less than 20mm ore powder feeding equipment.Disk feeder by the device driver, feeder ontology, astrology and measurement devices belt conveyor components. Feeder and belt conveyor driven by a driving device, the device driver with the electromagnetic clutch of feeder opening, stop and change both functional role. Measurement conveyor belt speed is less than 1m / s, in order to speed with a velocity detection device, in order to prevent a deviation detection Weighing roll-adjusted.
Feature:
Disc feeder is composed of the motor, reducer, disc, adjusting sleeve, seat and other components. Motor though the triangular belt, reducer drives disk rotation. The lower part of the disc is connected to the reducer. The motor and reducer are fixed to the frame.
Application
Disk feeder is applicable to less than 20mm ore powder feeding equipment.Disk feeder by the device driver, feeder ontology, astrology and measurement devices belt conveyor components. Feeder and belt conveyor driven by a driving device, the device driver with the electromagnetic clutch of feeder opening, stop and change both functional role. Measurement conveyor belt speed is less than 1m / s, in order to speed with a velocity detection device, in order to prevent a deviation detection Weighing roll-adjusted.
Feature:
- Steady vibration, safe operation, durable life.;
2. Flux can be changed and controlled;
3. The machine can be adjusted steadily, low noise, low electricity consumption;
4. Simple structure, safe operation, light weight, small volume, easy to maintain.
5. The structure of the disc feeder is simple and easy to handle, and with the low cost of the advantages, this type of disc feeder is very popular.
Model | PDX16 | PDX20 | PDX25 | |||||||
Disk Diameter (mm) |
1600 | 2000 | 2500 | |||||||
Electric motor |
Model | Y16M -6B3 |
YCT 200-1 |
Z2-61 | Y160L -6B3 |
YCT225-2 | Z2-71 | Y200L1-6B3 | YCT-260 | Z2-82 |
Power (kw) |
7.5 | 11.0 | 7.5 | 11.0 | 15.0 | 10.0 | 18.5 | 22.0 | 17.0 | |
Speed (r/min) |
970 | 250-1250 | 250-1000 | 970 | 250-1250 | 250-1000 | 970 | 264-1320 | 250-1000 | |
Disk speed (rpm) |
6.3 | 1.6-8.0 | 1.6-6.3 | 4.5 | 1.2-6.0 | 1.2-4.5 | 4.5 | 1.2-6.0 | 1.2-4.5 | |
Capacity (m³/h) |
55.0 | 14.0-70.0 | 14.0-55.0 | 88.0 | 21.0-15.0 | 21.0-80.0 | 150.0 | 40.0-210.0 | 40.0-150.0 | |
Appearance size (mm) |
Long | 2810 | 2880 | 3308 | 3432 | 3629 | 3909 | |||
Wide | 1805 | 1844 | 2080 | 2171 | 2510 | 2581 | ||||
High | 1136 | 1258 | 1258 | |||||||
Weight(T) | G Liner | 2791 | 5070 | 6515 | ||||||
Mn Liner | 2773 | 5840 | 7115 | |||||||
S Liner | 2667 | 5060 | 8425 | |||||||
Material | Largest block (mm) |
90 | 125 | 150 |